T-Mobile G1 HTC Specification

Specification

Processor	Qualcomm® MSM7201A™, 528 MHz
Operating System	Android™
Memory	ROM: 256 MB RAM: 192 MB
Dimensions (LxWxT)	117.7 mm x 55.7 mm x 17.1 mm (4.60 in x 2.16 in x 0.62 in)
Weight	158 grams (5.60 ounces) with battery
Display	3.2-inch TFT-LCD flat touch-sensitive screen with 320 x 480 (HVGA) resolution
Network1	HSPA/WCDMA: Europe: 2100 MHz US:1700/2100 MHz Up to 7.2 Mbps down-link (HSDPA) and 2 Mbps up-link (HSUPA) speeds Quad-band GSM/GPRS/EDGE: 850/900/1800/1900 MHz (Band frequency, HSUPA availability, and data speed are operator dependent.)
Device Control	Trackball with Enter button
Keyboard	Slide-out 5-row QWERTY keyboard
GPS	GPS navigation capability with Google Maps™
Connectivity	Bluetooth® 2.0 with Enhanced Data Rate Wi-Fi®: IEEE 802.11b/g HTC ExtUSB™ (11-pin mini-USB 2.0 and audio jack in one)
Camera	3.2 megapixel color camera with auto focus
Audio	Built-in microphone and speaker Ring tone formats: AAC, AAC+, AMR-NB, MIDI, MP3, WMA, WMV 40 polyphonic and standard MIDI format 0 and 1 (SMF)/SP MIDI
Battery2	Rechargeable Lithium-ion battery Capacity: 1150 mAh Talk time: Up to 350 minutes for WCDMA Up to 406 minutes for GSM Standby time3: Up to 402 hours for WCDMA Up to 319 hours for GSM (The above are subject to network and phone usage.)
Expansion Slot	microSD™ memory card (SD 2.0 compatible)
AC Adapter	Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz DC output: 5V and 1A
Special Features	Digital Compass, Motion Sensor

Google, Android, Android Market, Gmail, Google Talk, Google Calendar, Google Maps, Google Search and YouTube are trademarks of Google Inc. T-Mobile and the magenta color are federally registered trademarks of Deutsche Telekom AG. G1 and T-Mobile G1 are trademarks of T-Mobile USA, Inc.

1. Network bands in regions other than Europe and Asia Pacific may be different, depending on the mobile operator and your location.
   Please check with your mobile operator.
2. Battery times (talk time, standby time, and more) are subject to network and phone usage.
3. A Standby time specification ("specification") is an industry standard that is only intended to allow comparison of different mobile phones under the same circumstances. Power consumption in a standby state is strongly dependent on factors including but not limited to network, settings, location, movement, signal strength and cell traffic . Comparisons of different mobile phones using such a specification can therefore only be done in a controlled laboratory environment . When using any mobile phone in real life circumstances for which the mobile phone is intended, the standby time could be considerably lower and will be strongly dependent on the factors as mentioned above.